Our foremost
aim is to provide natural, high-fidelity music
reproduction standards - uncornpromising in every
detail. This is a concept to which all TE products
are strictly aligned, including the TE 12 mono power
amp.
The TE 12 is
packed with live
high-fidelity
listening quality. Natural and unobstructed, the
tonal spectrum fills every part of the auditorium
down to the very depths, in response to the given
programming material. Notwithstanding its high music
reproducing qualities, the TE 12 is geared to
extreme precision over the entire frequency range,
following a natural pattern. Dynamic response and
rapid pulse rise are other vital features present on
this power amp.
The TE 12 will
handle any load below 1 Ohm unproblematically. Built
for discerning musical enthusiasts, it satisfies all
demands imposed on a sincere music amplifier.
High-end technology from germany!
Prime quality
components and excellent standards of workmanship
are preconditions taken for granted in this class of
equipment. For the technically-minded reader it is
worth pointing out that the amplifier incorporates a
mains or line filter, a 500 VA transformer, charging
electrolytic capacitors totalling 136,000 µF and
adequately dimensioned polypropylene foil capacitors.
The driver stage is decoupled from the main power
pack and equipped with quick-acting switch-moded
electrolytic supply capacitors as well as MKP
metallized film capacitors.
Installed in
the signal path at the input is no capacitor, the TE
12 is with an automatic DC closed-loop control
equipped which always keeps the egress on 0 volts.
The connections to the output insulated terminals
are led with 7 X 1 mm of pure silver wire.
Technical Data:
Input impedanc:
1.2 K ohms balanced, 18 K ohms unbelanced
Output: |
450 watts |
into |
1,1 |
ohms |
|
440 watts |
into |
1,3 |
ohms |
|
390 watts |
into |
2 |
ohms |
|
240 watts |
into |
4 |
ohms |
|
150 watts |
into |
8 |
ohms |
10 watts „CLass
A" operation
Damping Factor: |
40 Hz
/ 4 ohms |
> 800 |
Distortion: |
5
watts |
< 0,01
% |
Signal
-to- Noise Ratio |
5
watts |
24 µV
/ 110 dB |
Transmission Range: |
- 3 dB |
5 Hz -
225 KHz |
Dimensions: |
width
x height x depth |
244 x
195 x 460 mm |
|