The ,TE PHONO' is a phono preselector stage with integrated RIAA tone
control, which considerably improves each Hifi record player.
Besides the pickup
system, the phono preseleator stage has an important influence on
the reproduation quality. The ,TE PHONO' improves the detailed
disintegration, the impulse stability and the room adaptation.
The small dimensions
enable to place it directly onto the record player. The long
programme lines running to the preamplifier and to the fullamplifier
can be placed without any problems.
The ,TE PHONO' is
available in ,MC' or ,MM' execution. DIL switches and socle elements
enable an extremely fine adaptation to the pickup System.
The ,TE PHONO' has been
developed in the so-called direct switching with strongly selected,
high qualified construction units in double mono technology. A power
pack especially constructed according to the demands of the studios
completes the very high acceptable level. A filter power pack is
offered as option.
The ,TE PHONO' is
delivered in different variations. The technical data point out an
extraordinary acoustic level.
The possibility to improve
with the ,TE PHONO' the sound considerably, will convince even
critical fans.
TECHNICAL DATA
Output Voltage max. |
MC+MM |
9 Volt |
Output Impendance |
MC+MM |
50 Ohm |
Saturation limit |
MC |
8 mV / 100 Ohm |
|
MM |
80 mV / 47 K Ohm |
Input Impendance |
MC |
10 bis 1000 Ohm |
|
MM |
22 K + 47 K Ohm |
Total Harmonic Destortion |
MC |
< 0,01 % |
|
MM |
0,003 % |
Distance of noise voltage |
MC |
80 dB |
|
MM |
84 dB |
Dimensions W x H x L |
Front |
110 x 50 x 8 mm |
Dimensions W x H x L |
Housing |
100 x 45 x 210 mm |
Suitable for |
for |
Transistor- and Tube Preamplifier |
Music data, TE Phono MC
Very good detail
resolution
Excellent stereo effect
Precise bass reproduction
High-fidelity music reproduction
|
HÖRBERICHT
TE PHONO
TE Phono MC
with
integrated RIAA
equalisation
TE Phono and
PC board
TE Phono
backsite
DIL switches
MC matching
S1 |
Sockel |
S2 |
40 Ohm |
S3 |
100 Ohm |
S4 |
180 Ohm |
S4+3 |
75 Ohm |
S4+2 |
35 Ohm |
S4+3+2 |
27 Ohm |
S3+2 |
30 Ohm |
It is for:
TE1, TE2, TE3,
TE Phono MC |
|